
※ Industrial control computer 19 "LCD color screens
※ WidowsChinese and English system double choice
※ With GB-2000 general microcomputer balance measuring system
※ Automatic program-controlled amplifier module
※ Any workpiece scaling function, arbitrary Angle clamp compensating and workpiece information storage
※ Qualified quantity showed that adjustment function measurement cycle
※ Signal amplifier amplification and manual adjustment, signal self-check, automatic diagnosis
※ Vector graphics, waveform and out of balance, shows at the same time
※ Surplus balabcing g and unbalanced torque, the g cm, g mm can choose to display
※ Optional function
1、 Balance Angle automatic tracking function
2、 Parking automatic positioning function
3、 Vector Angle function decomposition
※ Lathe bed according to user requirements lengthen
※ Supporting shaft neck can be based on user demand increased
Characteristics: this series is hard supporting horizontal dynamic balance machine, with roller bearing, universal couplings drive, regular for double speed motor drive, "A" type for frequency conversion motor speed and frequency converter, the industrial control computer for data processing, color screen real-time display don’t balance phase Angle and value, real-time speed, lathe bed all use whole casting, the stability is good。Widely used in electric motors, blower, diesel engine, agricultural machinery, textile machinery, and other industries, can be in the single side, double side and multiple correction plane balance measurement, suitable for axle, dish out and center of gravity of the rotor。 Have high efficiency, precision accurate, show intuitional, reliable quality, easy maintenance, the characteristics of software with ordinary workpiece and standard rotor two calibration function, overcoming the other hard supporting balance machine measurement system to users to calibration equipment defects, and the coupling compensation function and so on many kinds of measuring method and function to choose, can realize the input parameters, preview, the experiment, the results storage, print, operating all adopt the localization menu structure, the man-machine dialogue, automatic hints。
Technology parameters
Mass scope of workpiece kg |
30-1600 |
Biggest diameter workpiece mm |
1800 |
Two span of supports mm |
100-2300 |
Trunnion support mm |
20-120 |
Balancing speed r/min |
300-2500 |
Min achievable residual unbalance amount |
≤1gmm/kg |
Unbalance reduction ratio % |
≥90% |
Motor power |
11Kw |
mode of speed regulation |
Variable frequency speed regulation |
Transmission model |
Universal joint |
|